Yonkers is the largest city in Westchester and it has the housing stock to match – a great deal of it built long before anyone thought about air sealing. Two-family houses, tall narrow lots, attics that were finished at some point without much thought for what was underneath.
The honest answer to what it costs: most of our spray foam projects in Yonkers run between $3,500 and $12,500. That is the real range we quote, not a teaser figure, and where your house lands inside it depends on the things below.
A typical Yonkers attic
The job we quote most often here is an attic. On a standard Yonkers house that usually means stripping out old, settled fiberglass, sealing the bypasses around the chimney chase and plumbing stacks, then spraying the roof deck or the attic floor depending on what the house needs. That kind of job sits in the lower-to-middle part of our range. Where it climbs is when the attic has been partially finished and the foam has to reach behind knee walls.
What actually moves the price
- Area. Attic, rim joist, crawl space and walls each add square footage. Bigger jobs cost more in total even when the rate per foot is favorable.
- Foam type. Closed cell runs R-6.9 to R-7.1 per inch and doubles as an air and vapor barrier. Open cell is roughly R-3.9 to R-4.2 per inch, more breathable, and lower in cost.
- Target R-value. A higher target means more inches of foam and more material.
- Access. A tight crawl space or a finished wall cavity takes more labor and preparation than an open, walk-in attic.
- Removal. If damp, compressed or pest-damaged material has to come out first, that is a line on the quote.
Why the age of Yonkers’s houses matters to the number
Westchester’s housing stock is really old. The median home here was built in 1959, and roughly 27% went up before 1940. That matters for price: older houses tend to have shallow or settled insulation, unsealed attic bypasses around chimneys and plumbing stacks, and an uninsulated rim joist above the foundation. More of the work is preparation and sealing, less is simply adding depth.
Rebates in New York
New York runs energy-efficiency incentive programs through NYSERDA and the utilities, and insulation and air sealing frequently qualify. Which apply depends on your utility and the work involved, so we go through it with you during the audit rather than guessing.
What you get for free before you spend anything
We walk your attic, basement and crawl space, tell you where the house is actually losing heat, and price the work. No charge, no obligation, and no pressure to take the biggest option on the list. Nearly every job is finished the same day, and every installer is our own employee rather than a subcontractor.
Common questions about cost
Why can’t you just give me a price over the phone?
Because two houses on the same street can carry very different numbers. Area, foam type, target R-value, access and how much old material has to come out all move the price. Anyone who quotes a firm figure before seeing your home is guessing, and the guess is rarely in your favour.
Is the estimate really free?
Yes. We walk your attic, basement and crawl space, tell you where the house is actually losing heat, and price the work. No charge and no obligation.
Does open cell or closed cell cost more?
Closed cell costs more per board foot. It also delivers R-6.9 to R-7.1 per inch against about R-3.9 to R-4.2 for open cell, so it reaches a target R-value in fewer inches. Which is cheaper for your job depends on how much depth you have to work with.
Get a real number for your house
Call 914-825-6824 for a free energy audit and estimate in Yonkers, or send us a message.
More on the work itself: spray foam insulation, attic insulation, air sealing, and our Yonkers page.